After 47,992 km, 2 cracked steerer tubes and 1 broken derailleur hanger, it was time for me to go through the process of getting a new rig. The frame might have lasted another 12,000 kms or more, but having almost no chance of obtaining bits of spares for the frame like cable guides, cable stops etc was the nail in the coffin.
Unlike the professionals (some, not all), most of us are not regularly issued equipment. I classify myself as a heavy user, based on the number of tyres, chains and handlebar tape I go through. So knowing that I can prolong and/or extend the lifespan of my equipment at minimum cost sits quite high up the priority list. One of the important factors for me is after sales support and availability of spares. And yes, I wash my equipment regularly.
I started by going through the UCI-approved equipment list, which you can find here. I didn’t want to get caught up at equipment checks during races so if you don’t intend to race, you have a lot more options.. It is also interesting to see some new frames already on the list that have yet to be launched.
I knew it was going to be an interesting process to narrow down my choices. Price is definitely the main consideration for me. I also had to stick with rim brakes because a complete disc brake bike is not within my budget. With local bike shops (LBS) limiting walk-ins, some only by appointment and the majority with almost no online presence prior to Covid-19, it was almost impossible to see what past season models were still available. I also wanted to explore the Taiwanese/Chinese options. I sit more along the side of practical over brand names. So I would actually ride the bike, rather than look to resell it in the near future. With that said, I also wouldn’t say no if someone gave me a new bike.
Other than price, I also look at frame size geometry and where my current setup sits in the sizing chart.I started by going through the frame geometries of what I could find online and I filtered out a handful of options. After a number of messages online with a few manufacturers, I settled with this:
With only a slightly higher stack, the Memil Hanshi has very similar frame size geometry (Stack and Reach) to my current setup. It runs a direct-mount brake on the front fork and Pressfit bottom bracket, both which are on my existing setup. That’s three ticks right there. What was most impressive was the communication I had with the guys. They were prompt, detailed and professional in helping with the process of building up the bike. They have been extremely helpful not just in getting the frame over, but making sure that I had no problems putting it together.
Not forgetting the sick paint job.
Looking forward to seeing how this rides
Believe 